This apparatus is designed for use in distilling, drying, concentrating and heat soaking chemicals or biological products.
The water baths are available in two patterns according to the arrangement of the openings (a) single-row and (b) double-row.
This product is of water bath type. Its diameter of the maximum opening is 125mm, Each opening is provided with 4 rings and 1 cover. The inner bath is of one – piece sheet copper mounded by punching. The outer casing is made of choice sheet steel of high quality to be finished in spray lacquer. The gap between the outer casing and the inner bath is stuffed with glass wool for heat preservation. The heating clement is immersed in water so that rapid heating can be obtained and power consumption economized. A metal regulator is also equipped for adjusting the temperature from 37 ℃to 100℃ according to requirements. These are for adjuster’s reference only.
Set temperature: press SET key to set temperature. After pressing SET key, data on lower line digital tube will flash (the upper low measure temperature normally), which means meter enters the status of temperature setting. Press △ key to increase set value, and press ▽ key to decrease set value. If continuously press increase key or decrease key, set value will change rapidly. Press SET key again, and meter returns to temperature under normal working status. Setting is finished.