Automatic five adjustments Electric ICU Bed Model: SM-3239W Surgifield Medical England

Bed rail descend: grasp the rail and pull the switch forward push down the rail (illustration)

Bed rail elevating: grasp the rail and pull upwards, when the  sound of  “clatter” is heard, it means the rail has reached the right position.

End Board Installing

When install bed head board and bed end board, firstly turn the metal hook on the clip board upwards, then hitch the clip board onto the hitch nail on the front and back of the bed frame, later lock the metal hook with the hitch nail.

REMARKS

Must not sit at the edge of the bed when the bed is elevating tilting or descending, otherwise the bed board will be distortion due to the uneven strength on the bed.

Mustn’t operate the power when the patient is standing on the head or end of the bed.

The bed should use indoor environment.

Before use, please make sure there are no other things under the bed.

Don’t disassemble or detach the products without authorized permission.

Mustn’t use it in the power room or the places full of anesthetic gas or oxygen. But the general oxygen treatment is not forbidden.

If don’t operate the bed for a long time, please turn off the power switch or pull out the power plug and put the electrical wires in the wires slot. Avoid the castors pressing the electrical cables and wires or extrusion between head/calf board and other movable spare parts.

When the electric parts are moving, don’t touch the moving connecting Part to avoid injury. If the moving of the bed causes injury, press the “off” switch, the power is cut and the bed stops moving.

STORAGE AND TRANSPORTATION

The electric hospital bed with packing should be stored in the room ventilated, dry, cool, without heat source and corrosive gas. During transportation, please avoid wet, sunshine and heat source.

MAINTENANCE AND CLEANING

Clean every part of the electric hospital bed frequently. If the user makes biologic pollution, please use 75％ alcohol to Sterilize and clean it.